Here are the steps to create a construction credential for the XE360 locks.
You must first create a master credential.
To make a master credential. The lock needs to be Factory default reset, press and hold the mode/REX switch and present a card within five (5) seconds.
You should get 5 green flashes and 1 Beep. Master credential registration is successful. Master credential can only be used to add user credentials.
It will not unlock the door.
After creating the master credential you will use the master credential to create the user credential.
Present the master credential. You should get a solid green and 1 Beep.
Within 20 seconds, present another credential to add as a user credential.
You should get 5 green flashes and 1 beep. User credential registration successful.
Present user credential to operate the lock.
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.