To determine if a Glynn Johnson overhead device will fit on a door with special considerations, we will need the following details:
What overhead stop/holder series and size are you wanting to use?
Door width.
Door thickness.
Type of hinge or pivot (including size, model #, template or dimensional drawing if available.)
Degree of opening desired.
List of other items installed at the top of the door or header jamb like flush bolts, latches, closers, mag locks, etc. (including product names and numbers and templates if possible.)
Any unusual door conditions like decorative panels, rabbited door and frame, flush transoms, etc. that may interfere with the overhead device.
Is the door or frame already prepped for an overhead, and if so what mounting group and degree of opening was used from our instructions/template?
Send email inquiries to [email protected]
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.