To enable the alarm, simply press and hold down on the inside Schlage button for around five seconds. Release the button when it flashes. If you want to disable the alarm in the future, you’ll hold down the button until there are two flashes.
The alarm will default to using the Forced Entry alarm mode, but if you want to change which alarm mode is used, just press down the inside Schlage button again. Each button press will change the alarm mode. When the left side of the button lights up, the alarm is in Activity mode. When the middle portion of the button lights up, the alarm is in Tamper mode. And when the right side lights up, it’s in Forced Entry mode. Keep pressing the button until you get to the mode that you want to use. If you want to change the sensitivity level of a particular alarm mode, first set it to the alarm mode you want and then press and hold down on the inside Schlage button until it flashes three times (about 10 seconds). From there, you can press on the button again to cycle through the sensitivity levels (1 being the most sensitive and 5 being the least). With each press, you’ll get one to five beeps and flashes that correspond to the sensitivity level. Once you’re happy, stop pressing the button and wait for it to set the sensitivity level.
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.