How do I enable or get updates of ONR or Over the Network Re-Programming for my AD Series devices?

Over the Network Re-Progamming (ONR) is a new AD-Series On-line device feature.
ONR allows the Host ACP to upgrade new firmware versions onto the AD On-Line device, removing the need to manually tour the AD series lock/device with the HHD.

Note: ONR firmware updates are only available and supported directly by the Schlage AD Series Access Control OEM Partners.
Please contact your Access Control vendor to verify if your access control system supports ONR and for additional support for your specific access control environment.

As of Feb 2015, the current ONR firmware versions are ONR-AD.A.60 and ONR-AD.A.71
If your OEM Partner supports ONR, your AD lock firmware may have to be updated to the current ONR capable generation firmware from non-ONR capable firmware by manually touring the AD lock with the HHD first to allow the OEM ACP system to automatically update subsequent AD lock firmware updates.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.