The process below is the same for the NDE/ NDEB and the LE/LEB locks.
The Master Programming Credential will not grant access. It is used only to add additional credentials.
* Use the same Master Programming Credential for all the locks in the facility.
How to create the Master Programming Credential:
Turn and hold down the inside lever and present to the NDE reader the card you want to make the Master
Programming Credential.
The NDE LED will blink five times for successful enrollment of Master Programming Credential.
CAUTION: Do NOT lose the Master Programming Credential. If lost, reset the lock to factory settings.
WARNING: If the first card presented to a new lock to create the Master Programming Credential is not accepted, the lock has either been programmed or already has a Master Programming Credential.
If you cannot create a construction fob, confirm that the lock has been factory defaulted is not commissioned to any Engage site.
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.