Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

How do Construction Credentials work on the BE367 and the FE210?

When a Construction credential is presented to a lock in Factory Default condition, the outside thumb turn will engage and the green LED will flash for the default thumb turn actuation period. Access is granted. The lock is now in Construction Mode.

After putting a lock in Construction Mode, presenting a Construction credential will produce one of two results:

If the credential has the same construction code as the credential used to put the lock in Construction Mode, the outside thumb turn will engage and the green LED will flash for the default      thumb turn actuation period. Access is granted.

If the credential has a different construction code, there will be one blink of the green LED followed by one blink of the red LED. Access is denied.

 After programming the lock from an Schlage Express database, presenting a Construction credential will produce one of two results:

 If the Construction credential was set up as a user credential in the Schlage Express database, it will operate the lock per its programmed function (e.g., Normal, Supervised, etc.)

 If the Construction credential was not set up as a user credential, the lock will respond with an Invalid credential indication (one red LED flash w/beep). Access is denied


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.