How can I replace a dmanaged or missing UL Fire Label

If the devices installed less than a year ago we have the option of a UL field inspection.  Below are the details of what need to happen.

Allegion can submit for a field inspection in which UL will send a representative to the site.  An Allegion representative will be required to be there and will be in possession of our factory UL labels.  The UL inspector will verify the product has not been in service more than 1 year and has not been modified in any way.  Once the UL representative deems the product meets the criteria, the Allegion representative can apply the label.  The cost for this service is based on a ½ day or full day rate depending on the number of devices that need inspection.  The rates are approximately $1,500.00 for a ½ day and $3,000.00 for a full day.  These rates can fluctuate and do not include additional costs such as travel and/or lodging if required.  I can submit for this service but I’ll need several pieces of information (see below)?  Let me know how you would like to proceed.  Thanks.

·        A list of all the product needing labels

·        The date of manufacture and installation of each of the products

·        Are any of the product fire rated and if so, which?

·        The complete name and address of the company where the inspection is to take place

·        Who will be the Allegion representative at the site responsible for the following (Name, Telephone #, Cell Number, email)

o   All equipment is powered down before inspection

o   All equipment is accessible to the inspector

o   All necessary tools and/or test equipment for the product will be available

·        Who is the Authority Having Jurisdiction (AHJ) for the site (Name, Telephone #, email)

·        Allegion account string to pay for the service (the compliance group does not pay for these services)

If the product was installed more than 1 year ago, then the device must be replaced.