How are Butt Hinges located?

Steelcraft locates all butt hinges from the top of the door to the centerline of each hinge as standard practice:

  1. Locating hinges to the center line of the hinge keeps all hinge locations the same (at a given door height) regardless of hinge size.
  2. All variations in door height will vary the hinge locations accordingly.

If top or bottom of hinge locations are required:

  1. Special (non-standard) orders can be submitted but the distributor is responsible for coordinating any changes in hinge sizes.
  2. In this situation, doors and frames prepared for 5" hinges have a different location than 4 1/2" hinges. 

Industry Hinge Locations - Standard (SDI) versus Custom (NAAMM/HMMA):

  1. Standard (SDI) hinge locations are located based on the centerline of the hinge.
  2. Custom (NAAMM/HMMA) hinge locations are located based on the top or bottom of the hinge.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.