The Schlage RC’s Green wire (Request to Exit Input), when connected to the Black wire (Signal common/dc ground), can be used to monitor or release the access point.
In order to enable this function for the Access Point in Pure Access Cloud (PAC):
1. Click on the Access Points (Door Icon) on the left side of the screen.
2.Find the Access Point in the list.
Click on the three dots to the far right of that access point’s row.
Select “Edit Device Settings”
Click the “REX” slider to enable it, it will turn green.
In the new “REX Input Type” dropdown that displays, select either “Normally Closed (aka active high)” or “Normally Open (aka active low)” depending on the type of switch being used as a trigger.
In the new “REX” dropdown, select either “Admit” to allow the door to release when triggered, or “Report Only” to enable reader to report REX use WITHOUT releasing the door.
Click “Next” and then save the selections.
More information can be found in the Pure Access Cloud manual here.
If you have any questions, please contact Product Support at [email protected] or call 877-671-7011, options 2 > 2 > 3
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.