Does the Legacy Senior Swing and the Swing IQ operators come with the Push-N-Go feature?

Legacy Senior Swing and Swing IQ models are heavy duty operators and have the Push-N-Go (PNG) feature.  This feature is a programmable function in the control module.

LEGACY SR SWING

 The PNG settings are: Off, On, or FD (fixed).

• In the "ON" mode, the "hold open delay time" will be whatever the "hold open delay" is set to.
• In the "FD" mode, the" hold open delay" will be a fixed at 1 second delay. 

To program the Push-N-Go (PNG) function on the control box.

1. First activate the program feature by pushing any 2 of the 4 (RED) up/down buttons on the face of the control to enter the programming mode.
2. Once the display screen is lit,  push the "DOWN" button on the "SETTINGS" side (8 times) until PG is displayed on the "settings" window (actually looks like P6).
3. Then, on the "VALUE" side, push the "UP" button to change the value from "Of" to "On" , this will activate the Push-N-Go feature.

SWING IQ

The PNG settings are: Off, On, or FT (fixed time)
•    In the "ON" mode, the "hold open delay time" will be whatever the "hold open delay" is set to.
•    In the "FD" mode, the “hold open delay" will be fixed at 1 second delay.

To program the Push-N-Go (PNG) function on the IQ control box.
1.    Turn rotary dial until arrow is on settings, push in dial to select.
2.    Turn rotary dial until arrow is n Push-N-Go, push in dial to select.
3.    Turn rotary dial until arrow is on desired setting (Off, On, or FT), push in dial to select, this will activate the Push-N-Go feature