Does Ives offer a continuous hinge or pivot for lead lined doors?
Ives does not offer a continuous hinge designed specifically for lead lined doors. Standard hinges may work if the hinge and mounting hardware do not penetrate the lead lining in the door. Reference the hinge template for mounting locations. Since lead layer locations vary, always check with the door manufacturer for product compatibility.
General Reference -- Please Contact Door Manufacturer If Unsure:
If lead location in door is center / core *
1. For doors < 600lbs, consider 7203F or 7237F pivots, or 157XY hinge with sex bolts and reinforcements.
2. For doors > 600 lbs, consider 7230F or 7237F pivots.
* Always check for interference between lead and mounting screws.
If lead location is veneer, utilize the pivot selection guide in the Ives Catalog.
Always check for interference between lead and mounting screws.
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES
OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO
YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE
USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS
MADE AVAILABLE THROUGH THIS SITE.