Do CO-Series locks equipped with a privacy function (40) offer an exterior privacy indicator?

CO-100 (40 -Privacy Function): Privacy function is available on locks with firmware version 2.6.2 or higher. Privacy occupancy indicator can be enabled through manual programming of the CO-100. 
NOTE: Users can check firmware version on the CO-100 by following the instructions on pg 10 of the CO-100 Offline lock user guide to initiate lock status reports and following steps for firmware reports.

CO-200 (40 -Privacy Function): An Occupancy Indicator feature has been added to the CO-200-Privacy function locks with CO-Series Firmware CO.A.30. The Occupancy Indicator will blink the SCHLAGE Button and Inside Push Button (IPB) LEDs when privacy mode is activated using the IPB
NOTE: This feature on the CO-200 can be enabled using either SUS 6.7.0 on the HHD or via manual programming mode at a lock using CO.A.30 firmware.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.