Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
Can you use a 230NL or 210NL with a 2670 Guard-X?
The Guard-X device must have a Rim Cylinder installed in the head of the device to extend the bolt which also arms the device or retract the bolt which also disarms the device.
If desired, a Rim Cylinder can mount to the pull side of the door using a cylinder anchor plate.
Reference Step 2 of the Von Duprin Guard-X Exit Alarm Lock Fax Version Installation Instructions.
Von Duprin does not make a NL function Pull Trim that works with the 2670 Guard-X device.
The Von Duprin GUARD-X Data Sheet references using the 210DT or 230DT with a finished mounting package (050140-finish for 1 ¾" thick doors).
These Dummy Pulls and the Mounting Package would need to be ordered separately from the 2670 Guard-X device.
These Dummy Pulls or any other pull would need to be mounted where they do not interfere with the mounting of the 2670 Guard-X device.
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.