Can you put a primus cylinder in a B250?

Schlage does not offer the B250 with Primus and it cannot be ordered less cylinder. 

It is possible to install a Primus cylinder as a Primus cylinder will fit into a B250 housing as long as it was ordered with a 6 pin cylinder (B250 can be ordered as 5 and 6 pin but Primus is 6 pin only).  The lock will have to be ordered as B250P6 and any Primus key-in-lever cylinder will work once you have removed the tailpiece and installed the driver.

Also- Make sure that the customer uses an Everest/Primus driver to tip in the tailpiece. Driver: B502-949 - Everest/Primus and all Modular cylinders. 


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.

Other users ask