Can the Gen2 indicator be ordered with an electrified L9000 mortise lock?

Non-Deadbolt functions: (L/LV9090, L/LV9091, L/LV9092, L/LV9093, L/LV9094, L/LV9095) not allowed due to these locks not having a turn hub.

Deadbolt functions: (L/LV9492, L/LV9493, L/LV9494, L/LV9495) can be used with an indicator but will display an incorrect lock state depending on operation, see notes below.

L9492 & L9494:

False indicator readings: If deadbolt is retracted but lever is locked, the indicator would show “unlocked”- giving a false reading. If the lever is unlocked, but the deadbolt is extended, you can still simultaneously retract from the outside even if the indicator says “locked”- again giving a false reading. 

L9493 & L9495:

False indicator readings: These functions require a single spindle through the chassis. If deadbolt is retracted but lever is locked, the indicator would show “unlocked”- giving a false reading. If the lever is unlocked, but the deadbolt is extended, you can still simultaneously retract from the outside even if the indicator says “locked”- again giving a false reading.


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.