Can IP Address Filtering Affect Pairing the Schlage Encode to Wi-fi?

IP address filtering can impact the ability to pair the Schlage Encode Lock-including all Schlage Encode Models-with your Wi-Fi network. If you experience errors during setup, such as commissioning issues, or are unable to pair to Wi-Fi, it is advisable to temporarily disable IP address filtering and attempt the pairing process again. This adjustment enables the lock to connect without network restrictions.

Troubleshooting Network Issues for Schlage Encode

  • Check Wi-Fi Compatibility: Confirm that your network supports the required Wi-Fi standard, such as 2.4 GHz and WPA Network Type.
  • Disable IP Address Filtering: Temporarily turn off IP filtering to facilitate a successful connection between the Schlage Encode and your Wi-Fi network.
  • Verify Firewall Settings: Ensure that firewall settings are not blocking the device's access to the network.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.