You cannot order the HL6-9000 with a Schlage L9000 or 09-611 Chevron style indicator.
Exception: the HL6-9486 by default ships with the 09-611 Chevron style indicator.
There are challenges that must be overcome when trying to use the L9000 indicator with the HL6-9000.
With Gen1 L9000 indicator (Image below on left). DISCONTINUED
the push/pull paddles will have to be mounted horizontally
the L9000 emergency and cointurn indicator rose has a trim screw located on the bottom that will be difficult to install with the paddle cover in place
the HL6-9000 cover has a trim screw directly below the indicator that will be difficult to install with the L9000 indicator in place
09-611 Chevron style indicator (Image below on right).
the 09-611 Chevron style indicator can be installed after the push/pull paddle trim is installed
Gen2 indicators.
The Gen2 indicators do not mount the same as the Gen1 indicators, and do not have the mounting screws located at the bottom of the indictor. Gen2 indicators have locator pins located at the bottom. Line up pins on bottom of indicator module with holes on sectional trim, then pivot trim until flush with the door. Now turn the pre-installed screw clockwise using a 1/16" Allen key until the sectional trim is held firmly.
Please click here for installation instructions for the Gen2 sectional indicator.
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES
OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO
YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE
USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS
MADE AVAILABLE THROUGH THIS SITE.