If the 4040SE is mounted on the"Pull Side" of the door, (requires a 4040SE-18 drop plate). Holes will need to be drilled in the drop plate to clear the GJ900 thru bolts.
If the 4040SE is mounted on the "Push side" of the door, the only way to use a GJ90 series, is to mount the GJ90 on the "Pull Side" of the door with the Glynn Johnson "J" brackets. (90J Series, 90 Series with Angle Jamb Bracket).
Mounting with the GJ100 Series Stop:
If the 4040SE is mounted on the"Pull Side" of door, use ST2806 (requires a 4040SE-18G drop plate).
If the 4040SE is mounted on the "Push Side" of the door, there is no conflict with a 100S. The 100H cannot be used.
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES
OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO
YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE
USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS
MADE AVAILABLE THROUGH THIS SITE.