Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

Can I order ANSI / ASA strikes with Interconnected locks?

The Schlage CS210 or S200 series interconnected locks are not available with ANSI/ASA strikes.

The Falcon H2000 series (H2101, H2171) are not available with an ANSI strikes.

 


You can order the 10-025 ANSI latch strike or the 10-087 ANSI deadbolt strike separately. However, when using a ANSI/ASA strike with an interconnect lock, there are things that must be considered:

  • You cannot use a ASA/ANSI latch strike and a ASA/ANSI deadbolt strike (like the 10-087) on a 4” CTC (latch to deadbolt)
  • Schlage does not have door prep templates for the use of ANSI strikes on interconnect locks

 



The CS210, H2101 and H2171 interconnect locks have not be tested or certified with ANSI/ASA strikes, therefore the use of ANSI/ASA strikes with the lock would invalidate any UL rating and warranty for the locks.


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.