Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

Can a Falcon SFIC mortise cam be changed in the field?

Falcon SFIC mortise cams are staked on. The can be changed in the field, but special tools and parts are required.

Tools/Parts needed:

  • Falcon SFIC cam
  • Throw pins (part number specific for housing length - see below)
  • IC disassembly tool set with punch (Pt # 1400)
  • Drive washer (A12664-010-00) (may be required if damaged during housing disassembly)

 

 



Throw Pin part numbers by housing:

C987= A12663-001-00

C988= A12663-002-00

C990= A12663-003-00

C992= A12663- 004-00

C997= A12663-001-00

C262= A12663-009-00

C265=  A12663-009-00




DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.