Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

Can a door be cut down in height?

Steelcraft's L-Series doors can be reduced in height by cutting off:

  1. A maximum of 4” from the top or the bottom of the door.
  2. If the door is fire rated, The distributor must be a listed UL/WH service procedures to maintain its rating.

The process for cutting a door down is as follows:

  1. It is recommended to remove the end channel first if cutting less than 1” of door.
  2. After cutting the door to the desired height an end channel of 18 gauge minimum should be reinserted and spot welded or plug weld into place.
  3. The placement of welds maximum 2” from the ends and 6” maximum on center.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.