Can a 4040XP Rw/PA closer allow the door to swing 180° with wide throw hinges?

ST-2575 is for a special cut and weld Rw/PA arm when used with wide throw hinges and needing 180° door swing. When ordering, you will need to specify size of the hinges, door thickness if other than 1 ¾", and the degree of opening required.

  •     If customer already has the unit in the field, they can order the arm only using part number: 4040XP-3077/PA x ST-2575 x Finish - specify required info as noted above.

ST-2576 is for a special cut and weld Hw/PA arm when used with wide throw hinges and needing 180° door swing.  When ordering, you will need to specify size of the hinges, handing, door thickness if other than 1 ¾", and the degree of opening required.

  • If customer already has the unit in the field, they can order the arm only using part number: 4040XP-3049/PA x ST-2576 x Finish - specify required info as noted above.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.