CT5000 / WRI400 has two reader interface inputs/outputs. The connections are labeled READER1 and READER2,
The CT5000 / WRI400 with two READERS has access rights for one door opening.
The CT5000 / WRI400 has signal lines for each reader - CLK\D1, DATA\DO, GND, BEEPER, GRN (led), RED (led),
CT5000 / WRI400 can control access for one opening that might need two readers, such as the following applications;
1) A door frame reader(1) and a post (ADA) reader (2)
2) As two readers with one on left side READER (1) and one on the right side READER (1) of the opening,
3) The same opening with two readers, one as an outside reader (1) and the other as an inside reader (2).
Note- The CT 5000 / WRI400 will not power the readers; the interface is a signal interface, not a power interface.
The readers are effectively parallel and will be seen as one reader by the system.
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES
OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO
YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE
USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS
MADE AVAILABLE THROUGH THIS SITE.