Are the small hinge tension pins for the Ives 3SP1 spring hinge sold as a separate item?
The small pin for the 3SP1 holds tension on the spring hinge.
The pins are not sold separately by Ives. Comparable pins (Metric 18-8 Stainless Steel Dowel Pins) may be purchased through McMaster Carr.
For 3SP1 hinges shipped after November 2021; identifying characteristics - black bearings between knuckles of hinge, has UL label on one leaf and Ives logo on other leaf
Diameter 3 mm
Length: 16 mm
McMaster Carr: 91585A379 (Pack of 50)
For 3SP1 hinges shipped after June, 2015 but before November 2021; identifying characteristic is that the factory-shipped pin has a head on it. has white bearings between knuckles of hinge
Diameter 2.50 mm
Length 8 mm
McMaster Carr: 91585A275 (Pack of 50)
For older spring hinges (prior to June 2015)
Diameter 3 mm
Length: 8 mm
McMaster Carr: 91585A348 (Pack of 50)
The Pin uses a 5/32" Hex Wrench to adjust.
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES
OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO
YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE
USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS
MADE AVAILABLE THROUGH THIS SITE.