Are doors available for use with non Steelcraft window kits?

Doors are available with cutouts only. This practice is used for field installation of aftermarket (non-Steelcraft) glass trim by either the distributor or end user. The following information must be specified or included in the customer PO:

  1. The actual (exact) cutout size
  2. Location in door (from door edge, top and/or bottom).
  3. When required by the kit manufacturer, optional perimeter reinforcing channels are available when specified

If the door is fire rated, the addition of perimeter channels is a requirement.

Aftermarket (non-Steelcraft trims for field assembly) are available from several manufacturers. Steelcraft does not install aftermarket trim, that is a distributor responsibility or done in the field.


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.

Other users ask