Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

390PIR Not Locking

Verify adequate voltage and current at the  mag lock.

390PIR Mag Lock Sys Installation and wiring click "here"

Dual Voltage: 12 or 24 volts AC or DC
(Selected by jumper setting on PC board)
Max. Current: 0.7 Amps @ 12 Volts (DC)1.0 Amps @ 12Volts (AC)
0.5 Amps @ 24 Volts (DC)0.7 Amps @ 24Volts (AC)

Make sure power is going into terminals 1 & 2. PEX Output Terms. 3 & 4 have a closure applied, Fire Alarm input Terms 5 & 6 a closure applied, and the Release Input Terms 7 & 8 have normally open dry contact on across them.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.