SW4-8 Off ( disabled )
Also verify
NUISANCE DELAY (factory default: 3 seconds)
The amount of time the door must be pushed before triggering the DELAYED EGRESS CYCLE
Programmable 0 - 3 seconds. (BOCA Units are fixed at 1 second.)
A. Press and release SW3, the LED will begin flashing RED.
B. Thereafter, press SW2 once for each second of nuisance delay desired, up to 3 seconds maximum.
Each SW2 activation will cause the LED to flash GREEN and the horn to beep .
C. Press SW3 and the nuisance delay will be stored in non-volatile memory.
NOTES: 1. To program nuisance delay to zero, eliminate Step B.
2. Setting nuisance delay to zero will allow the lock to go into delayed egress the instant the door is pushed. This may prove
inconvenient in some applications.
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.