What keyways are available for Falcon?

RELATED FAQS

Question
Answer
See the installation instructions 718 for -C devices.
Templates for current 718 series trim can also be found on Falcon website
See 24 and 25 series trim section in the Price Book.
It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system.  A keyway name may be shared between the two key fami...
A double cylinder(-2) option is not available on a Falcon device but is available from Von Duprin.
The 40-100 is a multiple tailpiece pack with a pre-assembled, 0-bitted, key-in-knob cylinder.  The kit includes the following: (1) Pre-assembled cylinder 0-bitted, less tailpiece 40-100 (...
The pack is available in all keyways, Everest and Classic families including restricted keyways except Primus. 
The FSA/FSE 510L trim is only available in 24Vdc.
Falcon D series deadbolts will not accept Schlage Key-in-lever cylinders. The faceplate plug hole is smaller in diameter than the Schlage plug and does not fit flush when i...
For a Schlage "C"  keyway:  Specify "CP6" as the cylinder suffix when ordering  D100 or D200 locks (All other Schlage keyways are not available).
Falcon SZ Series Door is the economy Steelcraft commercial grade door recommended light commercial applications when architectural specification are not needed. Options: The SZ-Series door is...
The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section.
For any device made after 2001, the part number for the Falcon 1690 dogging kit would be KIT.1197 For devices made prior 2001, the dogging kit is no longer available and a new device must be ...
The FA3 keyway is the ILCO equivalent to a Falcon Conventional G 6-pin keyway.
The top latch for a Fire rated surface vertical rod device is part #650375-00 which replaced the old part #F588.
A PO from a distributor with a letter of authorization from the end user.
Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series.  Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...
Special Rust Inhibitor (SRI) - is a pretreatment that is applied to the metal components prior to the addition of the LCN powder coat finish, standard or custom. ...