what is standard backset for ND series locfs

RELATED FAQS

Question
Answer
Hinge backset is the dimension from the leading edge of the hinge to either the stop on the frame or to the stop face (push side) of the door. For operating clearance, the hinge backset on the d...
A and AL product: Must use the 2 3/8" backset with the 41-005 extension linkD Knob and ND product: Must use the 2 3/4" backset with the 43-005 extension link
Only the Schlage D-knob and ND products are available with an extra long backset.  The part number for backsets over 5"-42" is XC03-069, this part will ship as an extension link to be used with a s...
The default backset is 2 3/4" and the latch faceplate dimensions are 1 1/8" x 2 1/4". The latch supplied is the 13-047 deadlatch and 13-048 springlatch.
The standard backset for the Falcon B Series is 2-3/4".  A 2-3/8" backset is also available if specified.
The Schlage ND electrified locks can be ordered with a 3-3/4" backset, but the latch cannot be ordered separately because of UL regulations.
ND-Series Cylinder Reference Table Function Door Thickness Cylinder Mechanism Complete Cylinder Non-Hotel Functions Standard Conventional 23-065 Primus 20-765 Pri...
The backset of the device may be too large and the latchbolt of the standard 24-R is "walking" into the center case caused by the back/forth motion of the door. Verify the device backset ...
If device backset is correct, replacing the device center case & center case cover with a F-24-R to add deadlocking to the latchbolt would resolve the issue. Parts to the F-24R center case...
 Falcon T Lock Latch Conversion Table       Effective mid-June 2013  Old Part Number   New Part Number       ...
   Falcon T Lock Latches No Longer Offered With The T Lock     Effective mid June 2013  Old Part Number  New Part Number   &nb...