Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
WHAT IS PART NUMBER FOR CYLINDER WITH CONSTRUCTION CORE
”
RELATED FAQS
Question
Answer
Will Falcon B locks prepped for BD accept a 6 or 7 pin core?
Resolution:
The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core). The tailpiece shown below is used for bo...:
What is the part number for a full size construction control key?
Resolution:
The Schlage full size construction control key part number is 48-056-ICX. The ICX suffix will change depending on if the key is for a new job or existing job. New jobs: Specify "ICX" E...:
What does the cylinder suffix BDC mean?
Resolution:
A small format disposable core is used as a SFIC construction core that is for low security applications and can be thrown in the waste bin after use.:
How to order the mortise full size interchangeable core with a construction core.
Resolution:
This only applies to the full size interchangeable cores. The SFIC mortise cylinders have part numbers for housings with construction cores (Disposable and Keyed). Simply add (-ICX) to the end o...:
Does Schlage offer a Rim cylinder FSIC housing less core?
Resolution:
Rim cylinder housing only for SFIC is part number 80-129.: