von duprin service kits

RELATED FAQS

Question
Answer
Schlage Everest 29 is a new keyway family that launched in August 2012 and is patented until 2029. It offers the highest level of restricted key system security by Schlage through patent protection...
ALK kit comes with standard RX switch. It can be ordered without the RX switch or with LX switch as an option.
Von Duprin does not offer a service to refurbish exit devices at the factory.Replaceable service items for some exit device parts are available for sale.Please contact technical product suppor...
The conversion kit does not contain a new mechanism case cover plate.  If a cover plate is desired you would need the Fire or Less Dogging Cover Plate for EL conversion kit and panic cover plate fo...
Von Duprin and Falcon do not offer repair services for any of its exit devices.
You cannot convert the old Von Duprin 33/35 rim exit device to EL electric latch retraction as the device center case was different than EL33/35 rim center case assembly.
HD-EL conversion kit for 3 feet exit device is 050384-00 and for 4 feet is 050385-00.
Von Duprin has a maintenance kit part number 050046-00 and maintenance instruction, part number 941079-00 for 98/99 series devices. There are some common parts between 98/99 series and 22...
The current draw of a Von Duprin exit alarm ALK is .25 amp when alarm is activated.
See descriptions for the 09-992 thru 09-997 parts kits for modular mortise cylinders.  The 09-998 is a kit for a rim cylinder.      
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...
A service kit is available, part number 40-223.  Product description available HERE. 
The Von Duprin LX kit would have a rod included in the kit.  The EL-LX switch kit does not include the rod as the EL dogging rod is used.
The current tools, pinning kits and key originating machines for all Schlage Everest full size cylinders and small format cores are the same used on Everest 29.
The Von Duprin EL option can be added to any existing 33A/35A, 98/99 series exit devices. 
The maintenance kit looks like a tackle box containing many service parts for the L9000, see list of components here.
Followings are the reason for 98/99 exit alarm ALK not sound when push bar is activated. Make sure key switch on exit alarm ALK is turned on, wait for 20 seconds before you activating the pushba...
The circuit board is sometimes referred to as a "module" in the field.
Yes, the current conversion kits will fit the old style/obsoleted 35 or 35 series vertical rod exit devices. 
There is no conversion kit for Von Duprin Chexit device.  If delay egress Chexit device is required, the entire device must be replaced.
Hand Net for Windows has been tested  and passed with the following operating systems:· Windows XP Professional Service Pack 2 32 or 64 bit· Windows XP Professional Service Pack 3 32 or 6...
The attached table shows the part numbers for LX-RX and LX-RX-LC switches field installed.
Handnet for Windows Operating Systems CompatibilityHand Net for Windows has been tested with the following operating systems:· Windows XP Professional Service Pack 2 (US English edition)· Windows X...
All Von Duprin 98 and 99 trims include screws for both 1 3/4" and 2 1/4" thick doors.
The capabilities of the auto operator and the required operation of the opening will affect the selection of a power supply.
The 900-4RL has two out put for EL devices and signals to the auto operators to open the doors. PS914 power supply is required with 900-4RL option board to operate the EL device and auto operato...
Von Duprin PS914 x 900-4RL supports two EL with two auto operator.
Please see the Maintenance Kit Manual for information on device lubrication as well as complete breakdowns and parts lists for Von Duprin exit devices.Exit devices and latc...
Followings are the list of the electric latch retraction EL/HDEL (hex dogging), QEL (quiet) kits: 114317-00 QELA Mod. Conv. Kit 040061-00 QELA Mod. Conv. Kit...
The programming processes for Allegion devices can be both product and features specific.  Some products programming processes are electronic in nature, others are physical in nature. &nbs...
You can only use one GBK Glass Bead Kit (1/4") per device on fire rated openings. Glass Bead Kit is for use on doors with raised glass beads.