USING WIRE LOOPS ON METAL DOORS

RELATED FAQS

Question
Answer
Electrical hinges or a power transfer units are the most commonly used practices to run electric power to locks and/or strikes. Electric Hinges: Most electric hinges will fit into a standard 4 ...
The 4040SE is non handed and can be mounted on the push or pull side of the door.
The 692 includes a 18" door loop, the 672 does NOT.
It is recommended to use the Von Duprin EPT10 with CX device but if you need a door loop or electric hinge these are also acceptable. See attached table for wire run and gauge requirements: ...