torx screws mortise

RELATED FAQS

Question
Answer
The Falcon MA-Series requires a different cam for keyed functions than its predecessor the Falcon M-Series.
 
 
(2) SCREW, TORX, T-15, #8-32 UNC 2A, UNDERCUT, FLAT HD, MACHINE,  1/4" LENGTH (2) SCREW, TORX, T-20, #12-24 UNC 2A, UNDERCUT, FLAT HD, MACHINE,  1/2" LENGTH (2) SCREW, 8-32 X 3/4 MS PIN TORX (1)...
You can order an L lock with a lever on one side and knob on the other as long as it's still rose by rose, or escutcheon by escutcheon (must be same style escutcheon). EXCEPTIONS: Knob trim on the...
Includes the SL1 lever on one side and the SK1 knob trim on the other side.
(2) #10-24 X 1.0  TORX OVAL HEAD MACHINE SCREW, FINISHED (2) SCREW, 8-32 X 3/4 MS PIN TORX (1) SCREW, 8-32 X 1 MS PIN TORX (2) SCREW, 8-32 X 7/8 MS PIN TORX
L9496 is a Privacy mortise lock with “Occupied” Indicator. Knob/lever retracts latchbolt from either side. Deadbolt thrown or retracted by key outside (retraction by key required in the event ...
All functions except L9463 and L463: Add L583-363 to the part number 09-509 L583-363 for the turn only or L9453 07L 626 L583-363 with a lock The L583-363 part number is an option and can not...
(4) SCREW, TORX, T-15, #8-32 UNC 2A, UNDERCUT, FLAT HD, MACHINE,  1/2" LENGTH (2) SCREW, TORX, T-20, #12-24 UNC 2A, UNDERCUT, FLAT HD, MACHINE,  1/2" LENGTH (2) SCREW, 8-32 X 3/4 MS PIN TORX (1)...
The 09-900 mortise cylinder thumbturn has three handing options: right hand, left hand, and non-handed.  Handing of the cylinder is done by a check ball and spring placed in the housing a...
Also applies to the 09-900 XL12-196 mortise cylinder coin turn.
The L series armor fronts are only available with square corners.  
There have been a few reported cases of the torx cam screw loosening on modular designs shipped prior to April 16th 2013.   History of cam screw changes: Standard screw shipped July 27t...
MA581 is a Storeroom function mortise lock.
MA581 operation: Latchbolt operated by key from outside or by operating inside knob/lever. Outside knob/lever is always inoperative. Auxiliary latch deadlocks latchbolt when door is locked.
The cam screw uses a T-10 and the housing screws use a T-15 driver.
To order less complete trim one side use LLL as the designation for less complete trim outside or inside. This applies to the L9000 & LM9300 Series mortise locks. LESS OUTSIDE TRIM Examp...
Torx head screws are only available as machine screws.
The L283-150 is a modified mounting plate to allow a user to only install trim on the inside of the L9000.  For installation and door prep requirements, see the install sheet.  Add...
Torx screws are not standard on the antiligature trim but are available as an option. Specify the L283-121 Torx screw pack.  This pack includes torx screws for the armor and strike. The rest of th...
In order to change functions between an L9050 and an L9056 a new lock body would be needed.  The lock body part number for an L9050 is L283-133.The lock body part number for an L9056 is L283-1...
 Mounting Posts   Part Number  Door Thickness  L583-211  1 3/8"  L583-212  1 3/4" - See note section on SL1 trim  L583-213  2...
The Schlage L-Series mortise lock spindle and spring part number can be found in the Table 1.     Spindles and Springs   Part Number  Description  L283-060 Spindle and spring, 1...
Grade 1 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards: Cylindrical, Bored and Preassembled Locks & Latches 800,000 Certified Cycles ANSI/...
The following templates are for the MA lock.  Use the matrix in each template for the specific function.  See here for Sectional trim . See here for Escutcheon trim. 
In late July, 2014, Schlage began taking orders for a new high visibility indicator for both N escutcheon and sectional trim applications.  A complete listing of lock functions and part number...
The L Series mortise indicator datasheet can be found here. Includes how to order.
RX wiring on all L9000 locks with RX switch manufactured after January 2, 2017:The L-Series switched to a handed modular three-wire request to exit (RX) switch. This change was originally completed...
Specific to the RX switch installed into the L9080EL/EU and L9082EL/EU and L9000 mechanical locks prior to January 2, 2017:ALL PART NUMBERS BELOW DISCONTINUEDThe L-Series switched to a three-wire r...
L9080 is a mortise Storeroom Lock Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever is always inoperative. Auxiliary latch deadlocks latchbolt when door is clo...