templete lonitude lever with l escutcen

RELATED FAQS

Question
Answer
The lever removal tool can be used to remove levers in both the ND and the L Series mortise locks.
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project.  This tool can be used for Schlage ND-Series ...
The E7500 electric mortise lock body supplied on E98/9975 devices require active trims (L, L-BE, TP, TP-BE, K, or K-BE) to retract the latch after the electronic lock body unlocks.
Beginning January 2, 2013 Schlage will offer the Latitude (LAT) and Longitude (LON) levers in the 629 and 630 stainless steel finishes.
The square block is probably the springcage assembly, L283-040.  This component has an internal spring to keep the lever in the horizontal position.
The part number is the 09-402, specify the design and finish.
To convert the Von Duprin 98/99 Rim or Vertical (Rod or Cable) Exit Device with functional lever (996L-R/V) to act like a rigid lever (996L-NL-R/V) with key over ride follow these steps: Remove ...