solenoid for old ELR

RELATED FAQS

Question
Answer
It can but the solenoid will need to be purchased through New England Door Closer as the factory discontinued the old ELR solenoid (part #650092-000) in June 2010.
The resistance readings for a Falcon 24 or 25 Series EL solenoid should read;Green to Yellow = Pull Coil, should measure between 1 and 2 ohms of resistance. Green to Orange = Hold Coil, s...
The 050535-00 replaces the old Von Duprin EL solenoid part number 971687. 
This is not an option, the older RDS-2 was used with the older Falcon Monarch ELR devices.  The power supply would apply 24VDC for 1 second then drop down to 5VDC for the remainder of hol...
As of Feb. 23rd 2011 Falcon RDS-2 power supply has been discontinued and no longer available.
The older ELR 17/18 device would have to replaced with a new EL-24/25 device and use the PS914 with either the 900-2RS or 900-4RL board.
Products shipped on or after August 8, 2012 no longer require the EL wiring adaptor. The ELK Wiring Adaptor (900ELK) was used only when using the PS914 power supply with either the 900-2RS or 900-...
 EL devices are wired to the Senior Swing, using the P10 (761465) cable.  Connect the "GRAY" wire to the SC terminal on the 900-2RS card in the Von Duprin Power Supply and the "VIOLET" wire to the ...