Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ schlage mortise cylinders ”

RELATED FAQS

Question
Answer
Can the modular cams be used on the older cylinders?
The cams for modular cylinders are unique and are not compatible with any non-modular mortise cylinders, Schlage or any competitors.
Can you order the old non-modular mortise cylinder?
We have completed our transition to the modular design and no longer have the old design.
What mortise cylinder cam do I use on a Falcon MA lock?
The Falcon MA-Series requires a different cam for keyed functions than its predecessor the Falcon M-Series.
 
 
How do I change the hand on the 09-900 cylinder turn?
The 09-900 mortise cylinder thumbturn has three handing options: right hand, left hand, and non-handed.  Handing of the cylinder is done by a check ball and spring placed in the housing a...
Also applies to the 09-900 XL12-196 mortise cylinder coin turn.
What cylinder is used for the Falcon 510L and 510L-NL trim?
The Falcon Monarch 510L and 510L-NL trim will accept either a 1 1/4" Mortise cylinder with a straight cam or a 1 3/8" Mortise cylinder with a straight cam using the blocking ring provided with the ...
Is the C987 a small format or full size core?
The "C" indicates small format IC core, which is the only core style Falcon products.  The C987 will be provided less core unless -6, or -7 suffix is specified (6 or 7 pin core) Example:...
What mortise cylinder cam is needed for KR4023?
The KR4023 mullion requires a 1-1/4" mortise cylinder with straight cam. This is stated in box 7 on the first page of the KR4023 mullion instructions.
What type of cylinder is the 20-001?
The 20-001 is a conventional mortise cylinder with a straight cam, compression ring and spring for use on rose trim. For use with the L9060 outside cylinder or other straight cam applications.
What non IC cam is offered by Schlage to work in a Falcon MA lock?
Schlage now offers modular style cams to operate the Falcon MA locks.  The following part numbers are cams for all MA locks (except the MA381): L583-638 for 1-1/8", 1-3/8", 1-5/8" length cylin...
Price Book 72A List Price $8.10
Will a Falcon cylinder work in a Schlage lock?
Key in lever Falcon cylinders do not work in Schlage locks.  The cylinders may fit, but there are no specific tailpieces created to operate any Schlage lock. SFIC SFIC is universal so Falcon and...
   Hotel cylinder in L9000 As long as the correct cam is used (Schlage clover), a Falcon Hotel cylinder will properly function in an L9486 hotel lock.
What is the thread on a mortise cylinder?
The thread spec on Schlage and Falcon mortise cylinders is 1.150 x 32
Does Schlage or Falcon manufacture a stainless steel cylindrical or mortise lock?
Schlage does not have a stainless steel/non-ferrous lock series. The only option that Allegion provides is the Grade 1 cylindrical Falcon X-Series. To order the Falcon X with the stainless st...
What cam to use for a modular cylinder in Sargent mortise lock?
The Sargent cams listed below work for all applications except 16 inside and 50 outside.  The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...
How do you specify cylinder dogging for mortise cylinders?
When ordering dogging with cylinder; specify complete cylinder with appropriate option below:XQ11-949 for all conventional cylinders  XQ11-948 for full size and small format IC cylinders
XQ11-947 was used Classic conventional cylinders prior to the release of modular - NOW OBSOLETE