RX switch installation on ALK

RELATED FAQS

Question
Answer
The RX switch can be installed at the factory when device is ordered or in the field with part# 650359-00. Installation instructions here will show how the RX swi...
The Request for Exit (RX) is available on the 55 and 88 Series Von Duprin devices.The RX switch is installed in the end case of 55 and 88 series exit devices.There is no kit to field install the RX...
ALK kit comes with standard RX switch. It can be ordered without the RX switch or with LX switch as an option.
The RX switch is required to activate the ALK. The RX switch monitors the pushbar and will signal the ALK to go into alarm when the pushbar is depressed. The RX switch also allows free in...
The 80 (Storeroom function) operates as follows: Key retracts latch (entrance by key only)
The attached table shows the part numbers for LX-RX and LX-RX-LC switches field installed.
The ND lock is available with an RX option:When ordering a complete ND lock specify RX when the request to exit (RX) switch is required.The ND80EL, ND80EU, ND96EL, ND96EU, ND12EL, ND12EU electrifie...