Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ qel device powersupply ”

Resolution: The Von Duprin PS902 power supply will operate the QEL device as long as you also use the 900-2Q board for devices shipped prior to September of 2012. After July of 2012, the 900-2RS boa...:

What power supply do I need for my 2 QELA devices with LCN auto operator?

Resolution: Use the PS902-2RS power supply with LCN auto operator on single door, PS904-2RS power supply on double door and PS904/906-2RS-2RS for 2 pair of QELA is required for basic operation with a...:

How many Von Duprin QEL devices can be connected to a power supply?

Resolution: Product Ordered before 7/10/2012 - Product identified by no label on QEL motor. You must use the 900-2Q option board with the PS900 power supplies to operate the QEL devices. The attached ta...:

Does the QEL retract the latch bolt and the pushpad?

Resolution: Yes the Von Duprin QEL exit device retracts the latch bolt and pushpad. Pushpad and latch bolt stay retracted as long as power is applied to the QEL exit device. :

Will the MPB-842 or MPB-840 power EL or QEL devices?

Resolution: The old MPB842 power supply will power up to two EL electric panic bars but will not power the QEL devices. A defective potted module inside the electric panic bar or defective power supply coul...:

Can I run 4 QEL devices from one PS902?

Resolution: No, you can only add one 900-2Q option board to the PS902 power supply and 900-2Q only can support two QEL devices.:

How many times can an EL device be operated when using a PS914-2RS with battery backup?

Resolution: The Von Duprin PS914-2RS retracts the EL or QEL device approximately 200 times with five second hold time after each pull.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ qel device powersupply ”

RELATED FAQS