Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
Parts manual for H series
”
RELATED FAQS
Question
Answer
Does the Falcon T series have an RX option available?
Resolution:
The Falcon T Series lock does not have an RX switch available.:
How do you convert an AL44 to an AL40?
Resolution:
To convert the AL44 to an AL40 you can replace the outside plunger unit in the chassis or order the AL40 chassis. Replacing the plunger unit is more difficult and time consuming and would not be r...:
How do I remove the lever on an M lock?
Resolution:
To remove the M lock trim follow the steps below in reverse. The M lock spanner wrench is 021415. Although this wrench is no longer available from&n...:
How do you remove an AL lock from a door?
Resolution:
AL-Series and discontinued D Lever-Series locks use castle nuts to hold the chassis to the spring cages and to keep the chassis positioned in the door. This causes confusion at times when the lock ...:
Was the H lock design changed to include the B500 deadbolt?
Resolution:
As of May 23rd, 2011 the H lock utilizes the B500 bolt. If the deadbolt is being replaced for an existing lock, the linkage and housing will change as well. The new linka...:
How to build an L-Series chassis.
Resolution:
This Step-by-Step guide is specifically designed for the functions listed below, however, it can be referenced with a majority of L series functions since most of the parts are ...:
Does Schlage or Falcon offer a backset greater than 5"?
Resolution:
Only the Schlage D-knob and ND products are available with an extra long backset. The part number for backsets over 5"-42" is XC03-069, this part will ship as an extension link to b...:
Are parts still available for the Schlage interconnect G series lock?
Resolution:
The current interconnect lock, S200 series (available in levers only), will not fit into the same door preparation.:
Are the Schlage H series knobs sold separate?
Resolution:
The knobs are available, part numbers listed below. 01-008 for a closed knob 01-009 for open levers 01-018 for cylinder knobs, LEV lever design not available in 01-018 01-026 for FSIC Specif...:
What is the part number for the Von Duprin maintenance kit?
Resolution:
Von Duprin has a maintenance kit part number 050046-00 and maintenance instruction, part number 941079-00 for 98/99 series devices. There are some common parts between 98/99 series and 22...:
Did the H-Series deadbolt and linkage change?
Resolution:
As of May 23, 2011 the Schlage H-Series is assembled with the Schlage B500-Series deadbolt and a new linkage. If the deadbolt is being replaced for a lock manufactured prior to May 23rd, 2011...:
What size is the Schlage H escutcheon?
Resolution:
Schlage H-Series Escutcheons Part Number Description Dimension 07-057 Inside escutcheon and turn 6.92" x 2.75" 07-035 Inside escutcheon, dummy - H170 6.92" x 2...:
How do you remove the cylinder from an A series knob?
Resolution:
*The older wafer style locks did not use a knob catch. The chassis must be disassembled before the knob can be removed because it uses the wafer lock chassis spindle.:
How thick of door will the standard 24/25 series device mounting package work with?
Resolution:
Standard mounting packages are only for a 1 3/4" thick door. Door thickness other than 1 3/4" need to be specified when ordering the device.: