Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
nd series install
”
RELATED FAQS
Question
Answer
What is this plastic clip on the ND chassis?
Resolution:
On August 15, 2012 Schlage began shipping ND-Series locks with a hassle free "clip" to aid with the installation of the anti-rotation plate. This feature has been added to the hub to keep the...:
Why is the ND lever hard to push on?
Resolution:
For ND locks shipping prior to January 30, 2017, the addition of the soft durometer spacer (SDS) on August 15, 2012 did affect the installation of the lever. Ultimately, removing th...:
How is the Schlage ND lock installed?
Resolution:
Select the appropriate installation instructions below for step-by-step guidance on how to install a Schlage ND lock. ND-Series Installation Instructions (locks manufactured after 01-31-2017)N...:
Is there an exit lock offered in the ND series?
Resolution:
The ND12 and ND25 are both exit locks.ND12 Outside lever always fixed. Insidelever always unlocked for immediateegress.ND25Blank plate outside. Inside leveralways unlocked for immediate egress.:
Can you get the ND series lock in a 609 finish?
Resolution:
As standard the ND lock is not available in a 609 finish.:
Is the latch sold separate on the ND series?
Resolution:
Latches are sold separately, see current Pricebook for part numbers.:
Does the backset extension link work with a 2 3/8" latch or a 2 3/4" latch?
Resolution:
A and AL product: Must use the 2 3/8" backset with the 41-005 extension link D Knob and ND product: Must use the 2 3/4" backset with the 43-005 extension link:
Is there a tool to drill the thru bolt holes on cylindrical locks?
Resolution:
Order the M204-198 thru-bolt jig, see Figure 1. Figure 1: M204-198 thru bolt jig The 40-080 was the old Schlage jig. The 030736-000-70 was the old Falcon jig. When the jig changed to...:
How do you order the ND series lock with a small format core?
Resolution:
The letters GD, HD, BD, or BDC should be put after the lock function. EXAMPLE: ND53BD GD = Schlage SFIC core HD = Construction core BD = Less core BDC = Plastic temporary construction core: