Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
ND LOCK FINISHES
”
RELATED FAQS
Question
Answer
Can you get the ND series lock in a 609 finish?
Resolution:
As standard the ND lock is not available in a 609 finish.:
What are the new announced ND-Series features?
Resolution:
NOTE: ND locks manufactured on or after January 30, 2017 will no longer make use of the soft durometer spacer. The improved spring cage and matching lever eliminates the need for this spacer. ...:
How long is the ND tailpiece for a thick door?
Resolution:
Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately. If an extended tailpiece is needed, then a complete lock ...:
What other locks can the blue lever removal tool 24002693 be used with?
Resolution:
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project. This tool can be used for Schlage ND-Series ...:
What replaced the old D series lever locks?
Resolution:
The old D series lever lock was replaced by the ND lock in September 2003.:
Can an ND lock with SFIC cores be extended to fit a 3" extended outside door?
Resolution:
ND locks can be extended up to 6" Extended Outside. :
What is the part number for a Schlage FSIC lever on an ND lock?
Resolution:
On ND Series locks manufactuered prior to January 30, 2017:The ND FSIC lever part number was 03-032. :
What is the part number for a key in lever tailpiece for the ND lock?
Resolution:
For modular designs: All functions except ND85 the tailpiece part number is N523-022. The ND85 tailpiece part number is N523-123. For non-modular designs: All functions except ND85 the t...: