Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ND athens lever return ”

Resolution: The lever return distance (tip of lever to door face) on the Jupiter lever design is approximately 1-3/4".:

Why does the lever on my T lock lever droop?

Resolution: Issue: One or both levers don't stay horizontal and droop down. Facts: Falcon T series locks in a high use application. Cause: Weak or broken springs within t...:

What is the part number for the lever return spring for an old 182LE trim?

Resolution: These parts are no longer available. For reference the spring part number is 4841 and the clip part number is 4326.:

What is the part number for the lever return spring for the MA lock?

Resolution: Lever assemblies part numbers are found in the Pricebook. Note they are handed.:

What is the part number for the lever return spring for the old M series mortise lock?

Resolution: Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series. Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...:

Are parts still available for the old Falcon M locks?

Resolution: Related solution: What is the part number for the lever return spring for the old M series mortise lock?:

What is the California State Reference Code regarding lever return?

Resolution: This is in regards to the California State Reference Code, (Formerly Title 19, California State Fire Marshal Standard) stating that all levers with returns comply; levers must return to within 1/2"...:

What are the dimensions on the LAT and LON levers?

Resolution: See dimensions for LAT and LON levers from the L9000 series :

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ND athens lever return ”

RELATED FAQS