lead time sheets

RELATED FAQS

Question
Answer
Allegion product lead times, freight policies and guidelines are available only to authorized distributor partners. Authorized Allegion Distributor Partners can view the current freight policies b...
Ives does not offer any lead lined pivots.  Some of the Ives pivots can be used on lead lined doors such as the 7230F, 7237F, 7230F/7237F Int.  The hole pattern for the mounting screws are offs...
The part number for 88 series dogging screw is 090004 (package of two) and 090083(package of ten).
Not specifically for lead lined doors.  But the standard hinges should work and not hit the lead lining in the door.  Since standard lead layers vary, check with door manufacturer an...
Lead lining is not needed, since the channel or through bolt is solid and the x-rays will not penetrate the solid metal.
The ND lead lined option is specified by XN12-307 and consists of two 1/16” thick rose plates, a single 1/8” button/cylinder plate and a 1/16” latch sleeve.
The door template L1 states: "Lead Lining: When L9000-Series or L400-Series locks are ordered with lead lining, add 1/8" to the width of the mortise cut-out on the lock case cover side of installa...