key cutting machines

RELATED FAQS

Question
Answer
A zero bitted Falcon SFIC core is combinated for the control key to be cut at all 4's.
Schlage does not recommend cutting the L or LP section key blanks in the field.  Below are some details.Non Primus:In the classic family of keyways the "L" key section is the highest level key...
 See tables below for available punches.   KEY SECTION  BLUE PUNCH   Everest S*, C*, & Classic/Obverse*  40-075   Everest T* & ...
For all Schlage and Falcon small format interchangeable cores shipped from the factory 0-bitted, the control key will be cut to all 4's.
The part number is 48-102 C, you will need to specify the cuts.
Falcon Standard Bitting Specs - 018 system Falcon Restricted Bitting Specs - 025 system
The Von Duprin CX 98/99-4 feet Rim devices on single doors with 5/8" stops and the standard 299 roller strike can be field sized to fit a minimum of 40.2" door opening.  This an...