interchangeable core install

RELATED FAQS

Question
Answer
The lever may be missing the slot feature for the core locking lug.  Verify slot is in place.
A control key is required to install or remove an interchangeable core from a housing or lever. The control key is identified by having "CONTROL" stamped on the bow. How to install and remove an i...
Schlage offers a comparable cam to the Yale 2160 and it will operate any Yale lock that utilizes the Yale 2160 cam.     Schlage Cams for Yale 2160  Part Number  Description  B520-7...
The ND85/AL85/A85 hotel lock is only available in a conventional Key-in-Lever cylinder.  Interchangeable core and Primus are not available with this function. 
A Primus Hotel cylinder (as well as an IC hotel cylinder) is not possible because there isn't enough room inside the cylinder for all of the required components. 
This only applies to the full size interchangeable cores.  The SFIC mortise cylinders have part numbers for housings with construction cores (Disposable and Keyed).  Simply add (-ICX) to the end o...
A zero bitted Falcon SFIC core is combinated for the control key to be cut at all 4's.
 DESCRIPTION PART NUMBER   Conventional Core  23-030  Conventional Core less logo  23-031  Primus Core  20-740  Primus XP Core  20-740-XP  Primus Core less logo  20-741 ...
The Schlage Full Size IC core is 6 pin only. 
It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system.  A keyway name may be shared between the two key fami...
For all Schlage and Falcon small format interchangeable cores shipped from the factory 0-bitted, the control key will be cut to all 4's.
The AL lock can not be ordered to accept any competitor full size core.  The ND lock should be used in these applications.