Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ H series parts manual ”

RELATED FAQS

Question
Answer
Are the Schlage H series knobs sold separate?
The knobs are available, part numbers listed below. 01-008 for a closed knob 01-009 for open levers 01-018 for cylinder knobs, LEV lever design not available in 01-018 01-026 for FSIC Specif...
Are parts still available for the Schlage interconnect G series lock?
The G-Series lockset was discontinued in 1981, and all service parts for the G-Series lock were discontinued in 1985. 
 The current interconnect lock, S200 series (available in levers only), will not fit into the same door preparation.
What size is the Schlage H escutcheon?
  Schlage H-Series Escutcheons    Part Number  Description Dimension   07-057  Inside escutcheon and turn  6.92" x 2.75"  07-035  Inside escutcheon, dummy - H170  6.92" x 2...
Did the H-Series deadbolt and linkage change?
As of May 23, 2011 the Schlage H-Series is assembled with the Schlage B500-Series deadbolt and a new linkage. If the deadbolt is being replaced for a lock manufactured prior to May 23rd, 2011...
Was the H lock design changed to include the B500 deadbolt?
As of May 23rd, 2011 the H lock utilizes the B500 bolt.  If the deadbolt is being replaced for an existing lock, the linkage and housing will change as well.  The new linka...
What is an interconnected lock?
Interconnected Locks: a lockset whose trim provides a means of simultaneous retraction of two or more bolts which may also be operated independently Medium duty Commercial, government or multi-...
What is the grading for S200 and H series locks?
Neither lock has a BHMA grade.
What is the warranty for Schlage commercial mechanical locks?
Warranty Statement3 Year Limited Mechanical Warranty and 1-Year Limited Electromechanical Warranty - Additional warranties listed below The provisions of these limited warranties do not apply to P...
What does the H-Series housing and linkage look like?
The housing and linkage is what sits underneath the inside escutcheon plate and can be seen in this exploded view.  The linkage is what gives the H lock simultaneous retraction.  It allows the dead...