FALCON MONARCH EXIT DEVICE

RELATED FAQS

Question
Answer
Falcon Monarch 24 series exit devices replaced the 17 Series exit devices. Falcon Monarch 25 series exit devices replaced the 18 Series exit devices.
 The Falcon Monarch 718C and the 718NL trims can be used on the 25-C exit device.  The 718C trim is listed in the Price Book for the 25 series  The instructions attached will give dimensional i...
The "904H" is a UL Panic label that is placed on the centercase of the Falcon/Monarch Panic device.
The Falcon Monarch 18-R-EO device can be converted in the field to the 18-R-L by purchasing three parts. The following items are required to convert the device.  812L or 816L lever tri...
"BA" stands for basic assembly or what is now referred to as Exit Only(EO)
Falcon Monarch XX series trims will work with Monarch 18 series exit devices.
Yes, part numbers for Falcon electric latch retraction EL conversion kits are as follows: 650147 for a 3' device. 650148 for a 4' device. 
The devices baseplates/scissor assemblies are different and will not accept the Von Duprin RX switch.
Devices built After 2/28/2011: Use a 1 1/8" - 1 1/4" mortise cylinder with straight narrow cam. (Cam profile same as the Schlage B520-731, see table below for part numbers) Devices built Befo...
 Modular 1-1/8"  Modular 1-1/4"  SFIC and FSIC  Non-Modular Non-IC Conventional  Non-Modular Non-IC Everest Primus  B520-730  B520-731  B520-2...
The Falcon C987 cylinder can be ordered with the #27 cam as it has a similar profile to the Schlage B520-731 cam for trims after 2/28/2011.
There is not a chart that shows which sex bolts are required for Von Duprin or Falcon/Monarch exit devices.