Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ept prep in doors ”

Resolution: EPT power transfer preparations are available on the Paladin PW14-Series door and FP14-Series frame. Electrified hinges are available on the Paladin PW14-Series door&...:

Where is factory recommendation for location of an EPT?

Resolution: EPT installation guidelines are as follows: Recommended location is 6" below top hinge per template Steelcraft will locate the power transfer prep at the Von Duprin re...:

Where is common cutout for Von Duprin EPT prep in Ives 224 Continuous Hinge?

Resolution: Cutout depends on the size of 224 hinge. See 112HD/224HD-EPT template. 112HD/224HD continuous hinge Center line of EPT to top of the door 83 inches 30 inches 85 inches 32 inc...:

What options are available on the CE-Series doors?

Resolution: CE Series door in a variety of embossed panel designs and gages. The CE series embossed panel doors also offer a wide range of specifiable options including sizes, and hardware prepar...:

How to install an L9000 mortise lock less outside rose trim?

Resolution: The L283-150 is a modified mounting plate to allow a user to only install trim on the inside of the L9000. For installation and door prep requirements, see the install sheet. Add...:

Does Ives offer a continuous hinge or pivot for lead lined doors?

Resolution: Ives does not offer a continuous hinge designed specifically for lead lined doors. Standard hinges may work if the hinge and mounting hardware do not penetrate the lead lining in the door.&nb...:

What is the most common practice for running electric power from a frame to the door and hardware?

Resolution: Electrical hinges or a power transfer units are the most commonly used practices to run electric power to locks and/or strikes. Electric Hinges: Most electric hinges will fit into...:

Does Falcon make a plate to cover holes when the door is prepped wrong?

Resolution: These items are not available from Schlage or Falcon. There are third party companies such as Don-Jo or Pro-Lok that manufacture cover plates.:

Where can I find discontinued G lock templates?

Resolution: Schlage G Series template locate here. :

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ept prep in doors ”

RELATED FAQS