are panic sets fire rated

RELATED FAQS

Question
Answer
A standard exit device can't be modified to a fire rated exit device.  A new device must be purchased.
Installation should be 6" from bottom of the door. See attached templates as reference.  T-5494 for HM Doors W-5494 for Wood Doors
Panic Hardware and Fire Exit Hardware are two different types of exit devices, and the proper selection is determined by code requirements. Panic Hardware is an exit device which is tested for u...
The most obvious difference (in the device) is the lack of mechanical dogging on a Fire Rated Device.  There are some internal parts that may be different and the method it is secured to the d...
The following common wiring diagrams are available:One Single Door with Panic BarElectric Latch Retraction, with Auto OperatorDelayed egress - Fire Rated ApplicationAuto Operator and actuatorElectr...
Electronic Protocols:Access Control Door with electric trimAccess Control with electric strike Access control with electric strike and LCN 4600 automatic operatorAccess Control with remote Loc...
The 8827L-LBR panic only, not fire rated can be ordered LBR.
The 8827 cannot be ordered Less Bottom Rod, but can be installed without the bottom rod.  The device was never tested without the bottom rod, that is why it cannot be ordered LBR.
The 4170 cover plate can be used to cover the 86 & 161 prepped doors.
Fire Rated three (3) frames are available in the following maximum door opening sizes: F and FN-Series frame: 4' 0" X 10' 0" single door opening 8' 0" X 10' 0” double door opening MU-Ser...