ANSI # for EPT

RELATED FAQS

Question
Answer
The B500 deadbolts meet the following certification: ANSI A156.5, 2001, Grade 2. Available UL Listed for 3-hour fire door.
The L9466 Store/Utility Room lock can provide this functionality. Operation: Latchbolt retracted by knob/lever either side. Deadbolt thrown or retracted by key from either side. When the deadbolt ...
BHMA provides a certified products directory complete with function codes and meanings from most of the major lock manufacturers.  The most up-to-date directory can be accessed through th...
Gage: Prior to 1970, sheet steel thickness was referred to by the term "gage". ASTM and ANSI currently do not list gage numbers in their standards. Like many generic terms, gage (or gauge) is ingra...
The term "gage" and Gauge" are used interchangeably.
Industry standards for hollow metal frames installation tolerances have been developed by both the SDI (Steel Door Institute) and HMMA (Hollow Metal Manufacturers). Both standards are based on the ...
Gage and gauge are interchangeable terms. Gage is an archaic numeric value used to define a range of thickness of material.  Gage is no longer used in ANSI standards and has been replaced with ...
Interconnected Locks: a lockset whose trim provides a means of simultaneous retraction of two or more bolts which may also be operated independently Medium duty Commercial, government or multi-...
MA531 (ANSI F20) Apartment Corridor Door Lock  Latch bolt operated by knob/lever from either side, except when outside knob/lever is made inoperative by buttons in face. Dead bolt operated b...